Broadband antenna combiner/splitter allows up to ten UHF base stations to use only one transmit and one receive antenna. The antenna combiner section contains innovative hybrid coupling, amplifying and matching technology to combine ten transmitters to one output with very low intermod distortion. The antenna splitter section has broadband input filtering and amplification to maintain signal levels through the splitters. High output isolation between ports is also achieved.
115Vac or 230Vac operation
High-quality TNC connectors ensure consistent impedance across the entire frequency range
Ideal for use with UHF wireless intercom systems
Rackmount brackets included for 19-inch rack
Antenna combiner/splitter 10 to 1
Standard IEC 320 power input connector
Two power outputs to supply up to ten transceivers
Power/overheat condition indicator
UHF base station accessory
Combiner Type - Antenna Combiner
Combiner Type - Splitter/Combiner
Spec Sheet available - Yes
Depth:
14.63 in
Height:
3.50 in
Width:
19.02 in
Product Weight:
11.02 lbs
Shipping Weight:
17 lbs
Color:
Silver
AC Input Power:
100 to 120Vac, 60Hz, 6A maximum
AC Input Fuse:
10A, 250V, 3AG
DC Output Power:
12Vdc, 5A for each output
DC Output Fuses:
5A, 250V, 5mm x 20mm
Antenna Splitter Frequency Range:
614 to 746 MHz
Antenna Splitter Output IP3:
> 30 dBm
Antenna Splitter Noise Figure:
<4.5 dB
Antenna Combiner Frequency Range:
470 to 608 MHz
Antenna Combiner Noise Figure:
10 dB (Typical)
Antenna Combiner Output IP3:
-55 dBc (at +17dBm input on each transmitter)
