Multiplexor for eight synchronous or asynchronous 270Mb/s SDI, DVB-ASI or SDTi video signals
Signal transport uninterrupted by loss of any SDI, DVB-ASI or SDTi input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four character card-edge display
Occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
These 8-channel SDI fiber transmetter transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space with optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths.
Multiplexor for eight synchronous or asynchronous 270Mb/s SDI, DVB-ASI or SDTi video signals
Signal transport uninterrupted by loss of any SDI, DVB-ASI or SDTi input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four character card-edge display
Occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Automatic coaxial equalization up to 250m at 270Mb/s (Belden 8281)
Fully hot swappable from front of frame with no fiber/coax disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths
DWDM wavelengths also available
SC/PC, ST/PC, FC/PC fiber connectors available
Input selection feature allows user to route 1 of the 8 incoming video signals to the SDI output
Regulatory Compliance:
FCC Part 15 Class A, EU EMC Directive
DC Voltage:
12 Volts
Serial Video Output - Standards:
SMPTE ST 259, SMPTE ST 305, DVB-ASI
Serial Video Output - Return Loss:
> 15dB to 270Mb/s
Serial Video Output - Signal Level:
800 mV nominal
Serial Video Output - Rise and Fall Time:
900 ps nominal
Serial Video Output - Overshoot:
< 10% of amplitude
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Return Loss:
> 15dB up to 270Mb/s
Serial Video Input - Equalization:
Automatic to 250m @ 270Mb/s with Belden 8281 or equivalent cable
Serial Video Output - DC offset:
0V ±0.5V
Serial Video Input - Standard:
SMPTE ST 259-C, SMPTE ST 305, DVB-ASI
Optical Output - Connector:
Female SC/PC, ST/PC or FC/PC
Optical Output - Wavelength:
1270 to 1610 Nm
Serial Video Output - Connectors:
BNC per IEC 61169-8 Annex A
Active Power:
10 Watt
Number of Slots:
2
Serial Video - Number of Inputs:
8 independent SDI, SDTi or DVB-ASI 270Mb/s signals
Serial Video - Number of Outputs:
1 Independent SDI, SDTi or DVB-ASI 270Mb/s signal
