Standalone Fiber Optic SFP BNC Frame

Model: 3405FRS-BNC

Dual Power supplies (primary and redundant)
Houses up to 4 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
On board Frame Controller for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The Evertz® 3405FRS-BNC SFP frame is the ideal solution for today's low cost, high density fiber optic distribution needs. The 3405FRS-BNC provides the flexibility to handle the high-speed requirements of 3G and HDTV as well as SD-SDI, SDTi, and DVB-ASI. The 3405FRS-BNC is designed on a standalone frame to house up to 4 hot swappable Evertz® SFP modules. This provides up to 8 EO or 8 OE in a standalone frame. The frame can be configured for a mixture of modules. The on board frame controller provides VistaLINK® capabilties for SNMP control and monitoring. The 3405FRS-BNC frame comes with a primary external power supply module. SFP's and redundant power supply must be ordered separately.

Dual Power supplies (primary and redundant)
Houses up to 4 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
On board Frame Controller for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules

Connector: BNC per IEC 61169-8 Annex A
Control: VistaLINK® / SNMP
Depth: 4.13 in
Height: 1.03 in
Impedance: 75 ohm
Number of Inputs: Up to 2 per SFP
Width: 7.08 in
Ethernet: SNMP over IEEE 802.3/U (10/100 BaseTx) RJ45 connector
Number of Outputs: Up to 2 per SFP
Maximum Input Power: -1dBm (Standard)
Wavelength: 1310nm (Standard & -S), 1270nm-1610nm ITU-T G.694.2 compliant (CWDM)
Operating wavelength: 1270 to 1610 Nm
DC Voltage: 12 Volts
Serial: Single Female mini 9-pin connector
Max Power Consumption: 12 W
Rise/fall Time: < 270ps
Density: Up to 8 EO, OE, or mixture of EO and OE in a miniature frame
Optical Power: -2dBm ±1dBm (Standard), +3.5dBm ±1dBm (CWDM)
Optical Sensitivity: -21dBm at 2.97Gb/s pathological Level A, -23dBm at 2.97Gb/s color bars (Standard)
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 110 Volts
AC Voltage (Maximum): 220 Volts
Module Capacity: 4 Evertz® SFP modules

Fiber Optic Connector Type - LC-LC
Fiber Optic Signals Supported - RS-232

3405OO13-DA4 - 1-channel Reclocked SFP Optical Regenerator, Standard 1310nm Laser

3405OO13-DA4-H - 1-channel Reclocked SFP Optical Regenerator with High-sensitivity Receiver, Standard 1310nm Laser

3405OOxx-DA4 - 1-channel Reclocked SFP Optical Regenerator, CWDM 1270 to 1610nm Laser

3405OOxx-DA4-H - 1-channel Reclocked SFP Optical Regenerator with High-sensitivity Receiver, CWDM 1270 to 1610nm Laser

3405R-2 - 2-channel Non-reclocked SFP Optical Receiver

3405R-2R - 2-channel Reclocked SFP Optical Receiver

3405R-DA4R - 1-channel Reclocked SFP Optical Receiver

3405R-DA4R-H - 1-channel Reclocked SFP Optical High-sensitivity Receiver

3405T13-2 - 2-channel Non-reclocked SFP Optical Transmitter, Standard 1310nm Laser

3405T13-2-S - 2-channel Non-reclocked SFP Optical Transmitter, Short-haul 1310nm Laser

3405T13-R - 1-channel Reclocked SFP Optical Transmitter, Standard 1310nm Laser

3405T13-R-S - 1-channel Reclocked SFP Optical Transmitter, Short-haul 1310nm Laser

3405Txx-R - 1-channel Reclocked SFP Optical Transmitter, CWDM 1270 to 1610nm Laser

3405Txx/yy-2 - 2-channel Non-reclocked SFP Optical Transmitter, CWDM 1270 to 1610nm Laser

Standalone Fiber Optic SFP BNC Frame 181 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ