The 1200DD & 1201DD are LED digital clocks with 7-segment-digits display.They may operate as a timecode-reading clock or as a SMPTE ST 12-1 linear timecode reader, simply displaying the input timecode.In addition to SMPTE ST 12-1 timecode, the clocks can operate on the internal quartz time base from IRIG-B, a GPS antenna or NTP.This multi-way reference capability allows easy integration into new or existing clock systems.The model 1200DD clock face has 2.25" tall digits that may display HH:MM:SS AM/PM or HH:MM:SS FF, depending on the control settings.The model 1201DD clock face has 1.00" tall digits that may display HH:MM:SS AM/PM or HH:MM:SS FF depending on the control settings.The brightness of the digital LEDs is adjustable.
Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
Built-in quartz time base oscillator with battery back-up
May be operated as a timecode reader for use with countdowns
Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)
Optional GPS receiver
May be configured as a timecode generator to drive other clocks
LED brightness is adjustable
Runs on 50/60Hz, 115/230V AC power line
User-programmable time offsets
Rack mountable
VistaLINK® control for device configuration and status monitoring
Programmable daylight savings time start & end times
NTP client
Standard red LEDs (Green Optional -G)
Compatible with Evertz UDT protocol
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
158 F
Operating Temperature (Minimum):
-22 F
AC Voltage:
240 Volts
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
15 Watt
Current Draw:
12 Amps
Depth:
2.76 in
Height:
1.77 in
Width:
19.02 in
Product Weight:
2 lbs
Color:
Red
Standard:
SMPTE ST 12-1 linear time code - 24, 25 or 30 Fps
Impedance:
> 30 ohm, balanced
Connector:
3 pin female XLR
Level:
1V to 4.5V p-p
Baud Rate:
57.6kbaud
Format:
8 data bits, no parity, 2 stop bits
Accuracy:
< 2 seconds per day with power on, no timecode preset < 10 seconds / day with power removed
Time Zone Offset:
0 to 23.5 hours in 0.5 hour increments Set with menu
Network Type:
Ethernet 100 Base-TX IEEE 802.3u standard for 100Mb/s baseband, CSMA/CD local area network
Ethernet 10 Base-T IEEE 802.3 standard for 10Mb/s baseband, CSMA/CD local area network:
NTP Standard:
FRC-1305 compliant, client mode support
