These 3G / HD / SD electrical to optical converter supports all SMPTE ST 424 standards at 2.970Gb/s, supports all SMPTE ST 292-1 standards at 1.485Gb/s, supports SMPTE ST 259-C standards at 270Mb/s.
Supports all SMPTE ST 424 standards at 2.970Gb/s
Supports all SMPTE ST 292-1 standards at 1.485Gb/s
Supports SMPTE ST 259-C standards at 270Mb/s
Supports DVB-ASI (270Mb/s) and SMPTE ST 305 (SDTi) rates
Auto rate selection, indication and reclocking for SD-SDI/HD/3G data rates from 270Mb/s to 2.970Gb/s
Selectable non-reclock mode for other data rates
Programmable general purpose output (GPO)
Automatic input equalization up to 100m to 1.5Gb/s, 250m to 270Mb/s and 70m to 3Gb/s
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Fully hot-swappable from front of frame
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
Wavelength Range 1270nm to 1610nm
Spec Sheet available - Yes
Serial Video Input::
Reclocked:
SMPTE ST 424, SMPTE ST 292-1, SMPTE ST 259-C, SMPTE ST 305, DVB-ASI
Non-Reclocked:
Any bi-level signal type at rates of 270Mb/s to 2.970Gb/s
Connector:
1 BNC per IEC 61169-8 Annex A
Equalization:
Automatic to 100m @ 1.485Gb/s, 70m @ 3Gb/s with Belden 1694A or equivalent cable and 250m @ 270Mb/s with Belden 8281 or equivalent cable
Return Loss:
> 15dB to 1.5GHz, > 10dB to 3GHz
Serial Video Outputs::
Number of Outputs:
2
Signal Level:
800 mV ±80mV
DC Offset:
0 V ±0.5V
Rise and Fall Time:
< 135ps(HD/3G), < 900ps (SD)
Overshoot:
< 10 % of amplitude
Alignment Jitter:
< 0.2 UI (Reclocked) to 1.485Gb/s, < 0.3 UI (Reclocked) to 2.97Gb/s
Optical Output::
Standard:
SMPTE ST 297
Return Loss:
> 14 dB
Output Power:
0 dBm ±1dBm
General Purpose Outputs::
Type:
Dry contact relay closure (normally open)
Max Current:
500 mA @ 12V
Physical::
Number of Slots:
1
Active Power:
8 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
FCC Part 15, Class A, EU EMC Directive
