Fiber Optic Systems : Fiber Optic Converters : Evertz - 7707EO15-3-HD

Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1550nm DFB Laser

Model: 7707EO15-3-HD

Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707EO15-3-HD is a Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1550nm DFB laser. SC/PC, ST/PC or FC/PC connector options. Tally output on Frame Status bus upon loss of input signal.

Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
Detection and display of input cable length
Operation with multi-mode or single-mode fiber
SC/PC, ST/PC or FC/PC connector options
Tally output on Frame Status bus upon loss of input signal
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller

Spec Sheet available - Yes

Serial Video Input Standard: SMPTE ST 292-1, SMPTE ST 259 A, B, C, D, SMPTE ST 297, SMPTE ST 305, SMPTE ST 310, SMPTE344, M2S, DVB-ASI
Serial Video Input Number of Inputs: 3 (independent channels)
Serial Video Input Connector: BNC per IEC 61169-8 Annex A
Serial Video Input Equalization: Automatic to 75m @ 1.485Gb/s and 300m @ SD (270Mb/s) with Belden 1694A or equivalent cable
Serial Video Input Return Loss: > 14dB to 1.5Gb/s
Optical Output Number of Outputs: 3 (independent channels)
Optical Output Connector: SC/PC, ST/PC, FC/PC female housing
Optical Output Return Loss: > 14 dB
Optical Output Rise/Fall Time: 270 ps
Optical Output Wideband Jitter: < 0.2UI
Optical Output Nominal Wavelength: 1310nm, 1550nm
Optical Power 1310nm: -7dBm ±1dBm
Optical Power 1550nm: 0dBm ±1dBm
Number of Slots: 1
Active Power: 6 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)

Triple HD Electrical to Optical Converter 63 kb - Data Sheet

Project List

Products

Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1550nm DFB Laser

Model: 7707EO15-3-HD

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative