DS3 Electrical to Optical Converter, VistaLINK®, 1310nm, FP Laser.
Electrical to optical converter for DS3 (44.736Mb/s)
Automatic cable equalization for up to 300m of high quality 75? coaxial cable
Signal reclocking and jitter attenuation
Output wave shaping for G.703 standards compliance
Loss of signal (LOS) detection/indication (ANSI T1.231-1999 and ITU G.775)
Electrical output drive level control for enhanced distance
Transformer coupled inputs/outputs
Optical output wavelengths of 1310nm
Supports single-mode and multi-mode fiber optic cable (contact factory for multi-mode applications)
Fully hot-swappable from front of frame
Occupies one card slot and can be housed in a 1RU frame that will hold up to 3 modules, a 3RU frame that will hold up to 15 modules, a 350FR portable
frame that will hold up to 7 modules or a standalone enclosure which holds 1 module
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capability is available when modules are used with the 3RU 7800FR or 350FR frame and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame
Spec Sheet available - Yes
DC Voltage:
12 Volts
Regulatory Compliance:
Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive
Input Standard:
G.703 @ 44.736Mb/s
Number of Inputs:
1 isolated
Input Connector:
BNC per IEC 61169-8 Annex A
Input Equalization:
Automatic to 300m with Belden 8281 or equivalent cable
Input Return Loss:
> 20dB up to 44Mb/s
Output Standard:
G.703 @ 44.736Mb/s
Number of Outputs:
2 reclocked
Output Connector:
BNC per IEC 61169-8 Annex A
Output Waveform:
Conforms to G.703 compliant masks
Output Return Loss:
> 15dB up to 44.736Mb/s
Output Drive Level:
Low for cable lengths < 70m or High for cable lengths > 70m
