3G/HD/SD electrical to optical converter supports all SMPTE ST 424 standards at 2.970Gb/s, SMPTE ST 292-1 standards at 1.485Gb/s and SMPTE ST 259-C standards at 270Mb/s. Auto rate selection, indication and reclocking for SD-SDI/HD/3G data rates from 270Mb/s to 2.970Gb/s. Selectable non-reclock mode for other data rates.
Supports all SMPTE ST 424 standards at 2.970Gb/s
Supports all SMPTE ST 292-1 standards at 1.485Gb/s
Supports SMPTE ST 259-C standards at 270Mb/s
Supports DVB-ASI (270Mb/s) and SMPTE ST 305 (SDTi) rates
Auto rate selection, indication and reclocking for SD-SDI/HD/3G data rates from 270Mb/s to 2.970Gb/s
Selectable non-reclock mode for other data rates
Programmable general purpose output (GPO)
Automatic input equalization up to 100m to 1.5Gb/s, 250m to 270Mb/s and 70m to 3Gb/s
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Fully hot-swappable from front of frame
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK
Spec Sheet available - Yes
Certifications:
FCC, CSA, UL
Current Draw:
0.50 Amps
DC Voltage:
12 Volts
Active Power:
11 Watt
Regulatory Compliance:
EU EMC
7707EO
- 19.4Mb/s or 143-540Mb/s SDI Electrical to Optical Converter
