Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707CVDTAxx-A4-F2

Analog Video + Audio + Bi-di RS-232/RS-422 Fiber Transmitter, dual fiber, CWDM Laser

Model: 7707CVDTAxx-A4-F2

Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
Supports both NTSC and PAL video signals
Broadcast quality analog video and audio performance
2 bi-directional RS-232 or 1 bi-directional RS-422
Superior digital data transmission

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707CVDTAxx-A4-F2 is a VistaLINK® - capable composite analog video, 4-channel audio and bi-directional RS-232/422 fiber optic transmitter for broadcast quality video signals.

Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
Supports both NTSC and PAL video signals
Broadcast quality analog video and audio performance
2 bi-directional RS-232 or 1 bi-directional RS-422
Superior digital data transmission
Signal transport over fiber uninterrupted by loss of input video, audio or data feeds
Adjustable gain equalization for up to 300m of Belden 1694A coaxial cable
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Analog Video Input Standards: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog Video Input Number of Inputs: 1
Analog Video Input Connector: BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization: 12 bits
Analog Video Input System Bandwidth: 5.5MHz
Analog Video Input Input Level: 2V p-p (Maximum)
Analog Video Input Gain Equalization: Up to 300m of Belden 1694A or equivalent (adjustable)
Analog Video Input Input impedance: 75 ohm
Analog Video Input Return Loss: > 30dB to 5.5MHz
Analog Video Outputs Standard: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog Video Outputs Number of Outputs: 1 buffered version of input
Analog Video Outputs Connector: BNC per IEC 61169-8 Annex A
Analog Video Outputs Output Level: 1V p-p
Analog Video Outputs Output Impedance: 75 ohm
Analog Video Outputs Return Loss: > 30dB to 5.5MHz
Analog Audio Inputs Number of Inputs: 4
Analog Audio Inputs Type: Balanced analog audio
Analog Audio Inputs Connector: 12-pin removable terminal block
Analog Audio Inputs Input impedance: High Impedance (> 20kohm)
Analog Audio Inputs Max. Audio Input Level: +24dBu
Analog Audio Inputs Signal Quantization: 24 Bits
Analog Audio Inputs Freq. Response: ±0.1dB, 20Hz to 20kHz
Serial Data Ports Number of Ports: 1 RS-422 or 2 RS-232 - Jumper Selectable
Serial Data Ports Connector: 4 pins (plus ground) on 16-pin removable terminal block
Serial Data Ports Baud Rate: Up to 3Mb/s (Determined by incoming data)
Optical Input Number of Inputs: 1
Optical Input Connector: Female SC/PC, ST/PC, FC/PC
Optical Input Operating Wavelength: 1270nm to 1610nm
Optical Input Max. Input Power: 0dBm
Optical Sensitivity WDM (-W Version): -26dBm
Optical Sensitivity Standard: -28dBm
Optical Output Number of Outputs: 1
Optical Output Connector: Female SC/PC, ST/PC or FC/PC
Optical Output Return Loss: > 14dB
Optical Output Rise and Fall Time: 200ps nominal
Optical Output Fiber Size: 9µm core/125µm overall
Wavelength Standard: 1310nm, 1550nm
Wavelength CWDM: 1270nm - 1610nm
Wavelength DWDM: C-Band (ITU-T G.694.1 compliant)
Output Power 1310nm FP: -7dBm ±1dBm
Output Power 1550nm (-W): -1dBm ±1dBm
Output Power 1550nm, CWDM DFB: 0dBm ±1dBm
Output Power DWDM DFB: +7dBm ±1dBm
Video Input to Video Output Delay: < 10µs
Audio Input to Audio Output Delay: < 1.9ms
Wavelengths CWDM: 1270,1290,1310,1330,1350,1370,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610 Nm
Active Power: 12 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)

Analog Video, 4-Channel Audio and RS-232 / 422 Fiber Transmitter 72 kb - Data Sheet

Project List

Products

Analog Video + Audio + Bi-di RS-232/RS-422 Fiber Transmitter, dual fiber, CWDM Laser

Model: 7707CVDTAxx-A4-F2

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative