The 7700ADA6-EQ-L is an equalizing 1x6 Analog Distribution Amplifier with passive loop thru. The 7700ADA6-EQ-L features one balanced equalized input, one passive looping output and six outputs. The module has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that are less than 2V p-p. The 7700ADA6-EQ-L occupies one card and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Passive loop thru
Gain Control
High common mode range and common mode rejection ratio (CMRR)
Jumper selectable AC or DC coupling
Jumper selectable fast or slow back porch clamp
DC level control when clamp is enabled
Cable equalizer adjustment range: 0m to 300m of 8281 or 1694AA
Consistent input impedance if card power is lost
Module Status/Local Fault
Spec Sheet available - Yes
Analog Video Input - Standards:
Any analog video format, up to 2V p-p and 30MHz bandwidth
Analog Video Input - Connector:
BNC per IEC 61169-8 Annex A
Analog Video Input - Common mode range:
> 6V p-p
Analog Video Input - CMRR:
> 70dB to 1kHz
Analog Video Input - Signal Amplitude:
2.5V p-p max
Analog Video Input - Cable Equalizer:
0m to 300m of Belden 8281 or 1694A cable
Analog Video Input - Coupling:
AC or DC (jumper selectable)
Analog Video Input - Return loss:
> 40dB to 10MHz, > 30dB to 30MHz
Analog Video Input - Clamp Range:
> ±600mV
Analog Video Input - Fast Clamp Attenuation of 60Hz:
> 36dB
Analog Video - Number of Outputs:
6 + 1 passive loop
Analog Video Outputs - Connector:
BNC per IEC 61169-8 Annex A
Analog Video Outputs - Output Impedance:
75 Ohms
Analog Video Outputs - Gain Control Range:
±5dB
Analog Video Outputs - DC Level:
< ±100mV (with DC Coupling active and back porch clamp disabled)
Analog Video Outputs - Frequency Response:
< ±0.05dB (to 5.5MHz)
Analog Video Outputs - Differential Gain:
< 0.17% (0m to 300m)
Analog Video Outputs - Differential Phase:
< 0.19° (0m to 300m)
Analog Video Outputs - C/L Gain Inequality:
< ±0.1% (all cable lengths)
Analog Video Outputs - C/L Delay:
< ±2ns
Analog Video Outputs - Output Isolation:
> 42dB to 10MHz, > 32dB to 30MHz
Analog Video Outputs - Output Return Loss:
> 40dB to 30MHz
Analog Video Outputs - Noise Performance:
< -78dB RMS NTC7 weighting, < -70dB RMS 15kHz to 5.5MHz
Voltage:
+12V DC
Power:
1.2 Watts
EMI/RFI:
Complies with FCC Part 15Class A; EU EMC Directive
