Network Equipment : Gateways : Evertz - 670IPG-X19-25G-100G

Ultra High-Density IP Media Gateway

Model: 670IPG-X19-25G-100G

16x input and 16x output SD/HD/3G SDI coaxial ports
Up to 4x QSFP28 ports in hot main/hot backup configuration with flexible channel mapping for bandwidth optimization
Loopback of any signal to IP/SDI output, to allow central NOC monitoring and destination monitoring
AES67 audio packet time: 125µs or 1ms
Pop suppression on output audio

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 670IPG-X19-25G-100G is Evertz' third generation low latency, ultra high-density gateway for IP encapsulation/de-encapsulation of SDI over 25GbE, as well as protocol conversion including SMPTE ST 2022-6 and SMPTE ST 2110.

With direct conversion of up to 16x input and 16x output SD/HD/3G signals to/from IP using SMPTE ST 2022-6 or SMPTE ST 2110 formats, 670IPG-X19-25G-100G series delivers unparalleled processing density. The 670IPG-X19-25G-100G series also provides high-density format conversion as the industry transitions to SMPTE ST 2110.

670IPG-X19-25G-100G also provides per-input AVM monitoring, time-stamped Ethernet outputs and audio/video synchronization.

The 670IPG-X19-25G-100G series modules incorporates patent pending multipath, multi-flow packet merge for bit error resilience in networks, to achieve 100% QoS.

The 670IPG-X19-25G-100G can be managed via integrated HTTP web interface, in-band via its 25GbE interface as well as SNMP management via frame controller.

16x input and 16x output SD/HD/3G SDI coaxial ports
Up to 4x QSFP28 ports in hot main/hot backup configuration with flexible channel mapping for bandwidth optimization
Loopback of any signal to IP/SDI output, to allow central NOC monitoring and destination monitoring
AES67 audio packet time: 125µs or 1ms
Pop suppression on output audio
Video at native resolution
4x groups of audio (4x mono channels per multicast address)
Full VANC carriage
Frame buffer synchronized to Genlock, Master PCR or SMPTE ST 2059-2 PTP for output phase alignment
Accepts SMPTE ST 2059-2 or Master PCR timing references over 25GbE to allow time-stamping of all content over Ethernet
Modules have on-board AVM on all baseband signals
Modules support control in-band from 25GbE interface or via frame controller using SNMP with VistaLINK® PRO or MAGNUM Unified Control
Broad Support of Standards
1080p/59.94, 1080p/50, 1080p/29.97, 1080p/25, 1080p/23.98, 1080p/24, 1080i/59.94, 1080i/50, 720p/59.94, 720p/50, 525i/59.94, 625i/50.
For 12G standards, contact factory.
Standard Compliances
SMPTE ST 2022-6: video, audio and VANC
SMPTE ST 2110: video (ST 2110-20), audio (ST 2110-30), VANC (ST 2110-40)

Spec Sheet available - Yes

Active Power: 120 Watt
DC Voltage: 12 Volts
Standards: SMPTE ST 424M (3GB/s), ST 292M (1.5GB/s), ST 259M (270MB/s)
Number of Inputs: 16
Connector: DIN 1.0/2.3
Input Equalization: Automatic to 100m at 3GB/s, 150m at 1.5GB/s, and 350m at 270MB/s
Return Loss: > 12dB up to 0.5GHz, > 10dB up to 3GHz
Rise and Fall Time: Per SMPTE spec
Ethernet Interface: 4x QSFP28, 8x SFP28
Audio Encapsulation: SMPTE ST 2022-6, SMPTE ST 2110-30
Metadata Encapsulation: SMPTE ST 2022-6, SMPTE ST 2110-40
Video Encapsulation: SMPTE ST 2022-6, SMPTE ST 2110-20
Data Format: Ethernet/IP/UDP
Number of Slots: 2
Reference Inputs: 2x BNC on ev6-FR, analog 525/625, PTP via 25GbE interface
Supported Media Standards: AMWA NMOS IS-04 v1.3, IS-05 v1.1 and BCP-002-01 v1.0
EMI/RFI: Complies with EN 55035:2017/A11:2020

Gateway 924069 kb - Data Sheet

Project List

Products

Ultra High-Density IP Media Gateway

Model: 670IPG-X19-25G-100G

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative