![AboveLogo1.png](https://static.wixstatic.com/media/0a4466_84c7f7a98ab64bbba27c6b1d9a06c5a8~mv2.png/v1/fill/w_259,h_230,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/AboveLogo1.png)
The DM-EXT-2022-KIT consists of a transmitter (HD-TXU-4KZ-211-CHGR) and auto-switching receiver (HD-RXU-4KZ-202), and enables the extension of HDMI® and USB 2.0 signals. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the transmitter and receiver.1
4K60 4:4:4 and HDR Support
The DM-EXT-2022-KIT supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2
Integrated Web Server
The transmitter and auto-switching receiver each provide an integrated web server for device configuration and management. The web servers also provide device, network, and other types of status information.
Automatic Input Switching
Automatic switching between the HDMI and USB-C DisplayPort inputs of the transmitter as well as between the HDMI input and DM input on the receiver occurs based on the last connected input or on the routing priority assigned to each input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition to automatic switching, input selection push buttons on the transmitter and receiver enable the desired input to be selected manually.
USB 2.0 Data Extension
Two USB 2.0 host ports are provided on both the HD-TXU-4KZ-211-CHGR and HD-RXU-4KZ-202, enabling connection to a wide variety of supported USB 2.0 peripheral devices.4
Low Profile Installation
The transmitter and receiver can be placed on or attached to a flat surface. The transmitter can fit discreetly inside a presentation lectern or be attached to the underside of a table. The receiver can be mounted onto a wall behind a display or onto a ceiling above a projector. The devices are also rack rail mountable.