Microphones : Instrument Microphones : Shure Incorporated - KSM141/SL

Dual Polar Pattern Condenser Instrument Microphone, Champagne Finish

Series: Shure

Model: KSM141/SL

Mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns, provides flexibility in a wide variety of recording applications
Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar diaphragm for superior transient response
Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion and minimal harmonic and intermodulation distortion
Premium electronic components, including gold-plated internal and external connectors
Subsonic filter eliminates low frequency rumble (less than 17Hz) caused by mechanical vibration

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The KSM141/SL is a dual-pattern end-addressed condenser microphone with champagne finish, a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction. Includes windscreen and carry case, champagne finish. Designed for studio use, yet rugged enough for live applications, the KSM141/SL can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns, provides flexibility in a wide variety of recording applications
Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar diaphragm for superior transient response
Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion and minimal harmonic and intermodulation distortion
Premium electronic components, including gold-plated internal and external connectors
Subsonic filter eliminates low frequency rumble (less than 17Hz) caused by mechanical vibration
Three-position switchable pad (0dB, 15dB and 25dB) for handling extremely high sound pressure levels (SPLs)
Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Extended frequency response
Low self-noise
Exceptional reproduction of low-frequency sounds
Can withstand high sound pressure levels (SPL)
High output level
No crossover distortion
Uniform polar response
Superior common mode rejection and suppression of radio frequency interference
Applicable for acoustic, wind, low frequency instruments, overhead miking and room ambiance pick-up

Polar/Pickup Pattern - Cardiod
Polar/Pickup Pattern - Omnidirectional
Microphone Type - Electret Condenser
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 131 dB
Impedance: 150 ohm
Maximum SPL (Sound Pressure Level): 139 dB
Sensitivity: -37 dBV
Signal to Noise Ratio: 80 dB
Product Weight: 0.34 lbs
Attenuation Switch: 0dB, 15dB or 25dB attenuation
Low Frequency Response Switch: Flat, -6dB/octave below 115Hz, -18 dB/octave below 80Hz
Phantom Power: 48Vdc +/- 4Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
Current Drain: 4.65mA typical at 48Vdc
Common Mode Rejection: >50dB, 20Hz to 20kHz
Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Selfnoise (typical, equivalent SPL, A-weighted, IEC 651): 14 dB
Regulatory Compliance: CE, EMC

A100WS - Foam Windscreen for KSM141 and KSM137 Microphones

A300PC - Polishing Cloth for KSM Microphones

A53M - Shock Mount Microphone Clip

A57F - Microphone Clip for Microphones and Standard Microphone Stands

KSM137/SL - End Address Cardioid Condenser Instrument Microphone, Champagne Finish

KSM32/CG - Embossed Single Diaphragm Microphone with 20Hz to 20kHz frequency Response, Charcoal Gray Finish

KSM32/SL - Embossed Single Diaphragm Microphone with 20Hz to 20kHz frequency Response, Champagne Finish

KSM44A/SL - Multi-pattern Dual Diaphragm Microphone with 20Hz to 20kHz frequency Response, Cristal Finish

Shure KSM141 Brochure.pdf 641 kb - Brochure

Project List

Shure KSM141 Spec Sheet.pdf 471 kb - Data Sheet

Project List

Shure KSM141 User Guide.pdf 355 kb - Instructions

Project List

Suggested Products

Unidirectional Condenser Instrument Microphone with TA4F Connector

by Electro-Voice

YDM707 Dynamic Microphone

by Yamaha Corporation

PL® Series Wired Microphone

by Electro-Voice

Products

Dual Polar Pattern Condenser Instrument Microphone, Champagne Finish

Series: Shure

Model: KSM141/SL

Suggested Products

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative