Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707MTADxxx-HD-F2

Evertz - 7707MTADxxx-HD-F2

evertz

HD-SDI 4 AES Bi-directional RS-232/RS-422, GPI/O Fiber Transmitter, Dual Fiber, DWDM Tx

Model: 7707MTADxxx-HD-F2

Supports HD-SDI and SDI video
Multiplexes up to 4 AES audio, bi-directional RS-232/422, 2 GPI and 2 GPO with HD-SDI or SDI
Supports all SMPTE ST 292-1 (1.485Gb/s) rates/standards
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports 32, 44.1, 48kHz AES audio inputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707MTADxxx-HD-F2 is a HD-SDI, 4 AES, Bi-directional RS-232/RS-422, GPI/O Fiber Transmitter, dual fiber, DWDM Tx, VistaLINK®.Supports HD-SDI and SDI video.Supports single-mode and multi-mode fiber optic cable.

Supports HD-SDI and SDI video
Multiplexes up to 4 AES audio, bi-directional RS-232/422, 2 GPI and 2 GPO with HD-SDI or SDI
Supports all SMPTE ST 292-1 (1.485Gb/s) rates/standards
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports 32, 44.1, 48kHz AES audio inputs
Reclocked video output for additional signal distribution
AES audio inputs can be synchronous or asynchronous to each other and/or to input video
Dolby E compatible
Embedded audio assignment/shuffle from input AES, input groups/channels and internal audio mixers
Four stereo pair mixers allow left/right assignment and summing from input AES and input groups/channels
Adjustable AES delay up to 50ms
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Local display of optical signal strength, video, audio and data presence, video format, GPI and GPO status
Automatic coaxial input equalization up to 130m at 1.485Gb/s and 250m at 270Mb/s (Belden 1694A)
Accepts any wavelength in the 1270nm to 1610nm range
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Fully hot-swappable from front of frame

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Serial Digital Video Input Number of Signals: 1
Serial Digital Video Input Standards: SMPTE ST 292-1 (HD-SDI), SMPTE ST 259-C (SD-SDI), SMPTE305.2M (SDTi)
Serial Digital Video Input Connector: BNC per IEC 61169-8 Annex A
Serial Digital Video Input Equalization: Automatic to 100m (typ) @ 1.485Gb/s with Belden 1694A or equivalent cable
Serial Digital Video Input: Automatic to 250m (typ) @ 270Mb/s with Belden 1694A or equivalent cable
Serial Digital Video Input Return Loss: > 15dB up to 1.5GHz
Serial Digital Video Output Number of Signals: 1
Serial Digital Video Output Standards: SMPTE ST 292-1 (HD-SDI), SMPTE ST 259-C (SD-SDI), SMPTE305.2M (SDTi), EN500083-9 (DVB-ASI)
Serial Digital Video Output Connector: BNC per IEC 61169-8 Annex A
Serial Digital Video Output Signal Level: 800mV nominal
Serial Digital Video Output DC Offset: 0V ±0.5V
Serial Digital Video Output Rise and Fall Time: 150ps nominal @1.485Gb/s
Serial Digital Video Output: 600ps nominal @270Mb/s
Serial Digital Video Output Overshoot: < 10% of amplitude
Serial Digital Video Output Return Loss: > 15dB up to 1.5GHz
Serial Digital Video Output High Freq. Jitter: < 0.2 UI
AES Audio Inputs Number of Signals: 4
AES Audio Inputs Standards: AES3-2003 (Balanced AES)
AES Audio Inputs: SMPTE ST 276 (Unbalanced AES)
AES Audio Inputs Connector: Multi-pin Removable Terminal Block
AES Audio Inputs Sampling Rate: 32kHz, 44.1kHz, 48kHz
AES Audio Inputs Resolution: Up to 24 bits
AES Audio Inputs Minimum Input: < 200mV p-p
AES Audio Inputs Balanced: > 7V p-p
AES Audio Inputs Unbalanced: > 1.2V p-p
Impedance Balanced: 110?
Impedance Unbalanced: 75?
Impedance Return Loss: > 15dB, from 1MHz to 6MHz
Impedance Wideband Jitter: < 10ns p-p, with conditions of minimum to maximum cable length
Serial Data Number of Signals: 1 input/output
Serial Data Connector at Breakout: Multi-pin Removable Terminal Block
Serial Data Signal Type: RS-422, RS-232, or RS-485 (selectable)
Serial Data Input Termination: High impedance
Serial Data Input Failsafe Bias: 5k? to 5V on DI+ (selectable)
Serial Data Baud Rate: Up to 153Kb/s (selectable)
General Purpose Inputs Number of Signals: 2
General Purpose Inputs Connector at Breakout: Multi-pin Removable Terminal Block
General Purpose Inputs Type: Opto-isolated, Active low
General Purpose Inputs Input Voltage:
General Purpose Inputs Safe Voltage Range: -20V to +10V
General Purpose Inputs Off Condition (min): +3.5V
General Purpose Inputs On Condition (max): +2.5V (active low)
General Purpose Inputs Input Current (min): 1mA
General Purpose Inputs Input Current (max): 10mA (internally limited)
General Purpose Outputs Number of Outputs: 2
General Purpose Outputs Type: Dry contact relay closure to GPO COMMON, normally open
General Purpose Outputs Connector: Multi-pin Removable Terminal Block
General Purpose Outputs Output Current (min): 100mA
Optical Input/Output Number of Connections: 1 or 2 (-F2 versions)
Optical Input/Output Connector: Female SC/PC, ST/PC or FC/PC
Optical Input/Output Return Loss: > 14dB
Optical Input/Output Rise and Fall Time: 200ps nominal
Optical Input/Output Wide Band Jitter: < 0.20 UI
Optical Input/Output Fiber Size: 9µm core/125µm overall
Optical Input/Output Input Optical Sensitivity: See Application Configurations Chart
Wavelengths Standard: 1310nm, 1550nm (nominal)
Wavelengths CWDM: 1270nm to 1610nm (see ordering information)
Wavelengths DWDM: C-Band/L-Band (ITU-T G.694.1 compliant) (see ordering information)
Output Power 1310nm FP: -7dBm ±1dBm
Output Power CWDM: 0dBm ±1dBm
Output Power DWDM: +7dBm ±1dBm
Electrical Voltage: +12V DC
Electrical Power: 9 Watts (non-DWDM) or 12 Watts (DWDM)
EMI/RFI: Complies with FCC Part 15, Class A, EU EMC Directive
Physical Number of Slots:
Physical 7707MTA15-HD-W: 1
Physical -F2 versions: 2
Wavelength: 1561.42,1560.61,1559.79,1558.98,1558.17,1557.36,1556.55,1555.75,1554.75,1554.94,1554.13,1553.33,1552.52,1551.72,1550.92,1550.12,1549.32,1548.51,1547.72,1546.92,1546.12,1545.32,1544.53,1543.73,1542.94,1542.14,1541.35,1540.56,1539.77,1538.98,1538.19,1537.40,1536.61,1535.82,1535.04,1534.24,1533.47,1532.68,1531.90,1531.12,1530.33,1529.55 Nm
Active Power: 9 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Complies with FCC Part 15 Class A, EU EMC Directive

Bi-directional RS-232/422, 2 GPI/GPO Fiber Transmitter 88 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ